Stockist Of Outokumpu Oyj Duplex Stainless Steel Cold Rolled Sheet At Dealer Price in Mumbai
Table of Content
Outokumpu Products Specification
- Forta DX 2205
- Forta LDX 2101
- Forta DX 2304
- Forta EDX 2304
- Forta LDX 2404
- Circle Green Forta LDX 2101
- Forta H-series
- Forta Temper Rolled
- Cold Rolled Coil
- CR Strip
- Cold Rolled Sheet
- HR Coil
- Hot Rolled Strip
- HR Plate
- Precision Strip
- Quarto Plate
- AD 2000 Merkblatt
- ISO 14001
- Factory Production Control Certificate
- NORSOK
- ISO 50001
- Approval of Material Manufacturers
- ISO 9001
- Pressure Equipment Directive
- OHSAS 18001
- TS 16949
- Grinding
- Cutting
- Stretch-levelling
- Polishing
- Hardening
- Surface protection
- Plasma
- Waterjet
- Plasma
- Sulfuric acid
- Nitric acid
- Hydrochloric acid
Outokumpu Plate Distributor in Mumbai provide all grades in various material as per International standard
Buy Forta DX 2205 Hot Rolled Coil For Thinner Structures And High Mechanical Strength in India
Characteristic of Forta LDX 2101 Sheet
Stockholder of Outokumpu Quarto Plate Available in 5 to 130 mm Thickness
Outokumpu Quarto Plate Thickness
| Surface finish | Thickness (mm) | Width (mm) | Length (mm) | |
|---|---|---|---|---|
| METRIC | 1D to heat treated, Hot rolled, pickled | 5.0 to 130* | 400 to 3,260 | 400 to 13,500 |
| IMPERIAL | 1D to Hot rolled, pickled, heat treated | 0.19685 to 5.11811 | 15.748 to 128.346 | 15.748 to 531.496 |
For on time delivery and superior quality contact to Outokumpu Sheet Distributor in Mumbai
Get Ultra-thin Strips in Embossed Surfaces For Fuel Cell Production
Forta EDX 2304 Hot Rolled Plate Surface Finish
ISO 9001 Certified Precision Strip Exporter Stocks in Fully Rounded Edges
Edge of Outokumpu Cold Rolled Strips
Standards and Approvals of Outokumpu Flat and Long Products
NORSOK approved Outokumpu plate exporter in India provide Forta DX 2205, Forta SDX 100 and Forta SDX 2507 for oil and gas industry
Dimensions of Outokumpu Cold Rolled Coil
Metric Dimensions
| Surface finish | Metric Dimensions | |
|---|---|---|
| Width max. (mm) | Thickness (mm) | |
| 2B to skin passed cold rolled, pickled, heat treated | 2032 | .25 to 8 |
| 2D to Cold rolled, pickled, heat treated | 1524 | .4 to 6.35 |
| 2E to Heat treated, cold rolled, mechanically descaled | 2032 | .4 to 8 |
| 2R to Bright annealed, cold rolled | 1524 | .25 to 3.5 |
| 2H to Work hardened | 1524 | .4 to 6.35 |
| Brushed, polished | 1524 | .5 to 4 |
Outokumpu Americas Product Imperial Dimensions
| Surface finish | Width max. | Gauge |
|---|---|---|
| Inch | ||
| 2B to heat treated, cold rolled, skin passed, pickled | 72* | 10 to 24 |
| BA Mexinox only | 48 | 18 to 28 |
| 2D to Cold rolled, pickled, heat treated, | 60 | 12 to 24 |
| Temper rolled Mexinox only | 48 | 13 to 29 |
| Polished (not brushed) | 60 | 11 to 24 |
Outokumpu sheet stockholder and exporter in Mumbai offers waterjet, plasma and laser cutting service
Dimensions of Outokumpu Hot Rolled Sheet and Strips
| Surface finish | Width max. | Thickness | |
|---|---|---|---|
| Imperial | 1 to Hot rolled, pickled, heat treated | 72 inch | .1000 to .3750 inch |
| Metric | 1D to Hot rolled, pickled, heat treated | 2032 mm | 2.4 to 12.7 mm |
Naman Pipe & Tubes is stocking distributor of Outokumpu plate, we keep stock of Outokumpu Duplex Grades. Naman Pipe & Tubes supply Outokumpu duplex stainless steel sheets and plates at distributor sites in Saudi Arabia, Oman and Nigeria. The company is well known supplier of Outokumpu makes sheets and coils to petrochemical and refinery projects. As a stockist of Forta DX 2205, LDX 2101, DX 2304, EDX 2304, LDX 2404 plates, the advantage will get at material approved in ADNOC, KNPC and Saudi Aramco.
Dimension of Outokumpu Precision Strip
| Surface finish | Metric | Imperial | ||
|---|---|---|---|---|
| Width | Thickness | Width | Thickness | |
| mm | inch | |||
| 2H to Work hardened | 3 to 630 | .05 to 1.50 | .118 to 24.803 | .002 to .06 |
| 2R to bright-annealed, cold-rolled | 3 to 649 | .05 to 1.50 | .118 to 25.551 | .002 to .06 |
Standards and Approvals For Duplex Pressure Vessel
Outokumpu Hot Rolled Strip Services
For SS formed and exact finished as per requirements call now to Outokumpu Plate trader in Mumbai
| Abrasive Water Jet Cutting | Max. length in mm | Max. width in mm | Max. thickness in mm |
|---|---|---|---|
| 13,200 | 4,100 | 150 | |
| Sawing | Max. length in mm | Max. width in mm | Max. thickness in mm |
| 6,250 | 2,500 | 300 | |
| Laser EN ISO 9013 (Din 2310 (5)-IIL) | Max. length in mm | Max. width in mm | Max. thickness in mm |
| 6 kW | 6.000 | 2.000 | 25 |
| 4 kW | 6.500 | 2.500 | 15 |
| Possibility of welding edge preparation | |||
| Leveler | Max. length in mm | Max. width in mm | Max. thickness in mm |
| 2,000 | 1,450 | 35 | |
| Plasma EN ISO 9013 (Din 2310) | Max. length in mm | Max. width in mm | Max. thickness in mm |
| Dry | 18,000 | to 6,500 | 150 |
| Under water | 16,000 | 6,500 | 70 |
| Machining Turning/drilling/milling | Max. width in mm | ||
| 1,450 | |||
| Plasma and Submerged Arc Welding (SAW) | Max. length in mm | ||
| Profiles, pipes, submerged arc welding | 13,500 | ||