EN 1.4507 Plate & Alloy 255 Round Bar supplier in India

The Ferralium 255 grade is a super duplex stainless steel item that is supplied in annealed or hot worked condition. The EN 1.4507 grade is designed possessing chromium, nickel, and molybdenum as its primary constituents. The high strength to ratio within this grade allows them to possess superior abrasion and cavitation resistance. The grade can be shaped in different fixtures in a wide range of configurations. The Ferralium 255 Pipe is a fixture that is employed to connect different channels to allow fluid and gaseous flow to take place effectively in the system. The austenitic and ferritic microstructure propels the pipes in this grade to have good strength and load-bearing capacity. A Ferralium 255 Plate is designed in thickness above 6mm and provides stability and support to different applications. These plates have excellent resistance to crevice corrosion and pitting by acids in stress-induced environments. We are the Ferralium 255 Suppliers in India who keep stock of fixtures of different shapes and sizes that are suited to meet the requirements of different projects. All these products are quality-assured and available at the most reasonable prices.
The Ferralium 255 Round Bar is a unique grade that is manufactured in a circular cross-sectional area. These bars possess good strength and provide stability to a wide spectrum of applications. The versatile Ferralium 255 Weld Wire is a strong component that forms a strong weld. These wires act as filler material and are very reliable in their functioning. The robust component has a long service life and can withstand treacherous conditions.
Wide stock of EN 1.4507 Bolts and Duplex 1.4507 stainless steel Hex Bar in Mumbai
Table of Content
Specification List of ASTM A240 255 Plate
Grade | Ferralium 255, UNS S32550 |
---|---|
Pipe Form | Round, Square, Rectangular, Oval, Hydraulic Etc |
Wire Current | MIG-DCEP / TIG-DCEN |
Thickness | 4mm-100mm |
Flange Size Range | 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000 |
Pipe Delivery Condition | Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
Wire Form | MIG spools, TIG cut lengths, Reels and Coils |
Pipe Type | Seamless / ERW / Welded / Fabricated |
Sheet Width | 1000mm, 1800mm, 2500mm, 1500mm, 2000mm, 1219mm, 3000mm, 3500mm |
Flange Class / Pressure | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 |
Bolts Size | 3 mm to 200 mm |
Plate Length | 2440mm, 2000mm, 5800mm, 3000mm, 6000mm, |
Surface | mirror, 8K, embossed, NO.8, 2D, 2B, hairline, Brush, NO.1, checkered, BA, sand blast, NO.4, etching |
Fasteners Sizes | M02 to M30 |
Ferralium 255 Fasteners types we manufacture | UNS S32550 Nuts, Bolts, Screws, Washer, Threaded Rod, Studs, Stud Bolts and Rivets |
Sheet and Plate Form | Flats, Foils, Shim Sheet, Ring, Plain Sheet, Blank, Perforated Sheet, Chequered Plate, Strip, Rolls, Coils |
Flange Dimensions | ASME/ ANSI B 16.47, B16.5, Series A & B, BS4504, B16.48, BS 10, DIN, EN-1092 |
Finish | Cold rolled sheet, Hot rolled plate, 2B, BA NO(8), 2D, SATIN |
Flange Connection type | Large Male-Female, Ring Type Joint, Large Tongue, Small Male-Female, Small Tongue, Groove, Groove, Flat Face, Raised Face, Lap Joint Face. |
Pipe End | Plain End, Beveled End, Treaded |
Wire Diameters | .023”, .030”, .035”, .045”, 1/16”, 3/32”, 1/8” |
Applicable Specifications
Form | Standard |
---|---|
Metal Type | UNS S32550 |
Bar | ASTM A479 |
Wire | |
Sheet | ASTM A240 |
Seamless & Welded Tube | ASTM A789 |
Seamless & Welded Pipe | ASTM A790 |
Plate | ASTM A240 |
Fitting | |
Forging | |
Weld Wire | |
Weld Electrode | E2553 |
Din | 1.4507 |
Ferralium 255 Sd50 material stockist in Asia, get a free quote now!
Ferralium 255 Super Duplex Steel hex Bar Price List
Per Piece
6.1/4 DIA FERRALIUM 255 MACHINED BAR SD 50
Per Piece
3.1/2 DIA FERRALIUM 255 MACHINED BAR SD50 1100MM LENGHT
Per Piece
2500MM X 1250MM X 0.400MM ALLOY SHEET 255
Per Piece
32MM X 255MMX 2226MM ALLOY STEEL PLATE 255
Per Piece
3 SCH 40 X 255 ALLOY 255 SEAMLESS PIPE TO ASME SB790 MML-3 KGS
Per Piece
3 DIA FERRALIUM 255BAR SD50, LENGTH 1000 MM
Alloy 255 round bar Electrical Properties
Electrical Resistivity | 8.4e-005 ohm-cm | 8.4e-005 ohm-cm | at 25°C |
---|
Ferralium 255 Bars Chemical Composition
Element | Fe | Si | C | Mn | S | P | Cr | Mo | Ni | Cu | PREN | N |
---|---|---|---|---|---|---|---|---|---|---|---|---|
Max | 0.00 | 1.00 | 0.04 | 1.50 | 0.030 | 0.040 | 27.00 | 3.90 | 6.50 | 2.50 | - | 0.25 |
Min | 0.00 | - | - | - | - | - | 24.00 | 2.90 | 4.50 | 1.50 | 40.00 | 0.10 |
View Super Duplex Alloy 255 Tube and Ferralium 255 Hardness, Specification and Price list ex Mumbai
Super Duplex Steel Ferralium 255 SD50 Coils Mechanical Properties
Hardness | Melting range | Density | 0.2% Proof Stress | Impact Strength | Tensile Strength | Elongational |
---|---|---|---|---|---|---|
220 - 270 | 1385-1443℃ | 78.1 g/cm3 | 550 N/mm2 | 80J | 750 N/mm2 | 25 % |
Alloy F255 Hex Bars Equivalent
UNS | WERKSTOFF NR. |
---|---|
S32550 | 1.4507 |
Ferralium 255 Wires Pressure Rating
Properties | 21.1 °C | 250 °C | -70°C | 148.9 °C | -46°C | 93.3°C | 300°C | 204.4 °C |
---|---|---|---|---|---|---|---|---|
Ultimate Tensile Properties, MPa | 750 | 600 | - | 620 | - | 670 | 590 | 610 |
0.2% Yield Properties, MPa | 550 | 370 | - | 400 | - | 430 | 360 | 380 |
Area Reduction % | - | - | - | - | - | - | - | - |
Modulus of Elasticity / GPa | 200 | - | - | - | - | 194 | 180 | 186 |
Thermal Conductivity /kcal/(hr.m.°C) | 11.094 | 14.878 | - | 13.244 | - | 12.384 | 15.652 | 14.018 |
Elongation % | 25 | - | - | - | - | - | - | - |
Coefficient of Thermal Expansion /µm/m°C | - | - | - | - | - | 12.8 | 13.8 | 13.3 |
Charpy Impact V-notch /J | 100 | - | >45 | - | >45 | - | - | - |
Stockist of Ferralium 255 Sheet & Plate in India, View EN 1.4507 Strips and Perforated sheet dimensions
Stainless Steel Alloy 255 Wire Mesh Application
Ferralium 255 Weld Wire Types
Ferralium 255 Weld Wire
Ferralium 255 Sd50 TIG Welding Wire
Super Duplex 255 Mig Wire
AISI 255 Spool
Duplex Steel Ferralium 255 MIG Filler Wire
Ferralium255 TIG Filler Wire
Different Types of Ferralium 255 Pipe
Ferralium 255 Pipe
Super Duplex Ferralium 255 Seamless Pipes
Ferralium 255-SD50 Welded Pipes
Stainless Steel Alloy 255 ERW Pipes
Alloy Grade 255 EFW Pipes
Alloy 255 Hollow Pipes
Various Types of Ferralium 255 Plate
Ferralium 255 Plate
Ferralium Alloy 255 Hot Rolled Plates
Ferralium Alloy 255 Cold Rolled Sheet
Super Duplex 255 Coils
Alloy 255 HR Sheets
Super Duplex Ferralium 255 Cold Rolled Plates
Different variety of Ferralium 255 Round Bar
Ferralium 255 Round Bar
Duplex Steel Ferralium 255 Rectangular Bar
Ferralium255 Rod
AISI 255 Flat Bar
Alloy Grade 255 Square Bar
Stainless Steel Alloy 255 Hex Bar
Ferralium 255 Pipes Physcial Properties
Units | Temperature in °C | |
---|---|---|
Density | 7.81 g/cm³ | Room |
Melting Range | 1385 – 1443.3 °C | – |
Specific Heat | 0.113 Kcal/kg.C | 20° |
Modulus of Elasticity | 199 KN/mm² | 20° |
Coefficient of Expansion | 11.1 µm/m °C | 20 – 100° |
Electrical Resistivity | 78.6 µΩ.cm | 20° |
Thermal Conductivity | 14.2 W/m -°K | 20° |
Super Duplex Alloy 255 Material Thermal Properties
at 20-93°C, 11.7 µm/m°C at 20-205°C | CTE, linear 20°C | 6.11 µin/in-°F | 11 µm/m-°C |
at 20-315°C, 12.4 µm/m°C at 20-425°C | CTE, linear 250°C | 6.72 µin/in-°F | 12.1 µm/m-°C |
at 20-540°C | CTE, linear 500°C | 7.22 µin/in-°F | 13 µm/m-°C |
Typical value for stainless steel. | Heat Capacity | 0.115 BTU/lb-°F | 0.48 J/g-°C |
at 100°C | Thermal Conductivity | 105 BTU-in/hr-ft²-°F | 15.1 W/m-K |
Ferralium 255 Sd50 Testing
We stock in India and supply in below countries

Petroliam Nasional Berhad (PETRONAS)-Malaysia

Lake Charles Lng Liquefaction Plant-USA

Adco Jebel Dhanna Crude Storage Tanks

Qatar Petrochemical Company- Qatar

Markmore Energy (Labuan) Ltd-Malaysia

Umm Al Quwain water desalination plant- umm al quwain