E2209-16 Filler Wire & AWS E2209-15 Tig Rod manufacturer in India
Exporter & supplier of Super Duplex E2209-16 Welding Wire and Mig Rod in Mumbai
The E2209 grade is designed to weld standard duplex stainless steel. An E2209 Welding Electrode is a wire that is connected using a welding machine designed to create an electric arc. As the current passes through the wire, a lot of heat is generated to melt and fuse the metal for the welding process. The E2209 Filler Wire is a welding consumable that is designed with long lengths allowing it to securely seal the metal joints. The versatile E2209 Welding Wire is designed in different configurations and shapes in the form of rods and reels that are designed to meet the requirements of MIG, TIG, and SAW welding processes in different conditions. The E2209 Tig Welding Rod are thickened wires that use non-consumable welding electrodes as they utilize hand filler rods to strongly affix two fixtures or components in place. An E2209 Welding Rod is a high-strength grade that strongly binds different fixtures and is less susceptible to embrittlement after the welding process is over. These rods are designed in a wide spectrum of sizes and shapes to meet product requirements.
The E2209 Flux Cored Wire has a flux coating on the wire that solidifies compared to molten weld material. These wires aren’t completely clean and are designed to achieve deeper penetration in metals of different thicknesses. As the electrode in these wires melt they prevent oxidation as they weaken the weld in the system. E2209 Welding Consumables are devices that are employed to assist the operators during different welding procedures. These consumables are quality-assured products are available across all our outlets at the most reasonable prices.
Table of Content
Specification List of E2209 Welding Electrode
| Grade | Er2209 Welding Wire |
|---|---|
| Type | TIG and MIG |
| Specificaton | Φ1.0 ~ 1.6milimeter |
| Finish | Bright |
| Shielding Gas | 75-95% Ar + Rest Co2 |
| Standard | AWS A5.9 |
| Weight | 0.5kg, 0.45kg, 0.9kg, 5kg, 1kg, 0.45kg, 0.9kg, 0.5kg, 1kg |
| Diameter | 0.9/ 0.8/ 1.0/ 1.6/ 1.4/ 1.2 mm |
| Packaging | Packing Size is 275mm* 275mm* 105mm 300mm*300mm*105mm Outer Packing are 1spool/ctn carton box with antirust paper inside for E2594-16 spool product is packed. Container load is 72pallet/boxes, 60pallet/boxes, 20ft/ 22Pallets |
| Wire Tray | D100 to D200 mm D270 to D300 mm K300 mm |
| Application | Electrowelding |
| Flux Content | According to Requirement |
Manufacturer of E2209 Welding Consumables in India, perfect for precision welds, check sizes and price list
AWS A5.9 ER2209 Filler Rod Price List
Per Kilogram
3.2mm AWS A5.4 e2209-16 SS welding electrode
Per Kilogram
2 mm~5 mm duplex SS S2215 coating welding electrode E2209-15
Per Kilogram
3.15mm Stainless Steel Welding Electrode Rod E2209-16 E2209-15
2209 Tig Wire Weld Process
| ASME SFA 5.22 | E2209T0-1 |
|---|---|
| ANSI/AWS A5.22 | E2209T0- |
| ASME F - 6 |
Duplex 2209 Welding Electrode Welding Electrode parameter
| Recommended Welding Parameters and Availble Size | |||
|---|---|---|---|
| Overhead and Amperage Vertical | Diameter | Voltage | Flat |
| 65-75 | 3/32 | 24-28 | 70-85 |
| 80-90 | 1/8 | 26-30 | 85-110 |
| 100-120 | 5/32 | 28-32 | 110-140 |
| 110-130 | 3/16 | 28-32 | 120-160 |
Supplier & exporter of E2209-17 Electrodes and E2209 Tig Welding Rod in Mumbai, check latest price in India
AWS A5.9 Duplex E2209-16 Tig Rod
Duplex ER2209 filler materials are weld in the 2101, 2304, and 2205
E2209 Filler Wire Dimension
| packet/kg. | Size(Dia)(inch) | Size(Dia)(mm) | (DC+/AC) Current Condition Amps | case/kg. |
|---|---|---|---|---|
| 2 | 5/ 32” X 14” | 4.00 X 350 | 120-160 | 20 |
| 2 | 1/ 8” X 14” | 3.15/ 3.20 X 350 | 90-120 | 20 |
| 2 | 3/ 16” X 14” | 5.00 X 350 | 160-200 | 20 |
| 2 | 3/ 32” X 14” | 2.50/ 2.40 X 350 | 70-100 | 20 |
ER2209 Electrode Chemical Composition
| N | Mn | C | Si | Ni | Cr | S | Mo | P | Cu |
|---|---|---|---|---|---|---|---|---|---|
| 0.08-0.20 | 0.50-2.0 | 0.03 max | 0.90 max | 7.5-9.5 | 21.5-23.5 | 0.03max | 2.5-3.5 | 0.03 max | 0.75 max |
DIN 1.4462 Tig Rod Mechanical Properties
| Elongational | Yield Properties 0.2 % | Tensile Properties | ||
|---|---|---|---|---|
| MPa | psi | MPa | psi | |
| 26 % | 560 | 81,200 | 720 | 104,400 |
Duplex E2209 Filler Rod Types
E2209 Welding Electrode
AWS A5.9 ER2209 Filler Rod
Duplex 2209 Welding Electrode
AWS A5.9 Duplex E2209-16 Tig Rod
E2209 Filler Wire
ER2209 Electrode
DIN 1.4462 Tig Rod
Duplex E2209 Filler Rod
ASME SFA 5.9 Duplex E2209 Welding Wire
ER 2209 Duplex Steel Welding Rod
Duplex Stainless Steels E 2209 Mig Wire
UNS W39209 AWS Filler Wire
Er2209 Welding Wire Recommended Welding Parameters
| GTAW “Tig Process” | |||
|---|---|---|---|
| Amps DCSP | Wire Diameter | Shielding Gas | Volts |
| 60-90 | .035 | Argon 100% | 12-15 |
| 80-110 | .045 | Argon 100% | 13-16 |
| 90-130 | 1/16 | Argon 100% | 14-16 |
| 120-175 | 3/32 | Argon 100% | 15-20 |
Manufacturer & supplier of E2209 Solder Wire and E2209-16 Tig Rod at very low cost in India
ASME SFA 5.9 Duplex E2209 Welding Wire Uses
20 years of Experience as a supplier of these materials in below mentioned locations
Brunei Darussalam-Thailand
Alaska LNG- USA
Petroliam Nasional Berhad (PETRONAS)-Malaysia
Lake Charles Lng Liquefaction Plant-USA
Adco Jebel Dhanna Crude Storage Tanks
Qatar Petrochemical Company- Qatar