| Highlight of Duplex Anchor Bolts | |
|---|---|
| Ready Stock Available | M2 to M60 |
| Discount | 10% On bulk order |
| MTC | EN 10204 3.1/3.2 |
| Delivery Time |
|
| Diameters | 1/4 to 1-1/4 inch |
| Tolerance in mm | +/-0.01 to +/-0.05 |
| ASTM Standard | ASTM A182 |
| Thread |
|
| UNS |
|
| Forming |
|
| Standards |
|
| Werkstoff nr. | 1.4462 |
| Third Party Inspections |
|
Alloy 2205 Foundation Bolt Manufacturer in India
Application Where Duplex S32205 Wedge Type Anchor Bolt Mostly Used
Table of Content
Check SAF 2205 Toggle Bolts and Swedge Bolts specifications & sizes
Duplex Anchor Bolts Sizes & Thread
American standard
- ASTM A479
- ASTM A276
Duplex Anchor Bolts sizes
- Imperial screw:1/4″ to 1″
- Metric screw: M3 to M56
Custom size/ Cut to length
- Mail us at info@namanpipe.com
Length of SAF 2205 Toggle Bolts
- 3 to 200 mm
Duplex 2205 Headed Anchor Bolts are manufactured in different sizes, shapes and types
SAF 2205 Toggle Bolts Specification Chart
DIN 1.4462 L anchor bolts manufacturing method
- Cold forging
- Machining
- Thread forming
- Heat and surface treatment
- Hot forging
Origin of material
- European
- Korean
- Japanese
- Russian
- Indian
- Ukraine
- USA
Alloy 2205 sleeve anchors required testing & certificates
- Microstructure analysis
- Tensile test
- EN 10204 / 3.1, 3.2
- Impact testing
- Charpy V-notch test
- Rockwell / brinell Hardness test
Inventory delivery time
- 3-5 days
Delivery time (If not in Stock)
Need urgent delivery
- Get Quick Quote & delivery by Air, mail us at info@namanpipe.com
Material grade
- Grade 660
MTC
- EN 10204 3.1 Manufacturer Test Certificate / PED 97/23/EC Certified
Manufacturing process
- Cold finished
- Hot finished
Material equivalents
- UNS S31803
- Wnr 1.4462
UNS S31803 foundation bolts thread types
- Rolled
- UNJ
- UNR
- UNF
- Cut
- UNC
Uses & applications
- Water Desalination
- Sea Water
- Geothermal
- Chemical Process
- Oil & Gas
- LNG
Value added services offer by Naman Pipe & Tubes
- Factory Direct Shipments
- Cut Off & Chamfer
- Packaging: Box, Bags and Labeling
- Grooving
- Tapping & Drilling
- Milling
- Expedited Services
- Cut Threading
- Cross Drilling
UNS S32205 Sleeve Anchors surface finish
- Oxidation
- Phosphating
- Zinc impregnation
- DACROMET
- HDG
- Electric galvanized
Dimensional standard of Duplex 2205 Headed Anchor Bolts
Testing methods
- Decarburization test
- Tensile test
- Proof Load Test
- Torsion test
- Retempering test
- Head soundness test
- Carburization test
- Fatigue tests on screws
- Charpy impact tests
- Hardness testing
Testing standards of 2205 DSS Headed Anchor Bolts
- ASTM F606/F606M
- SAE J1199
- SAE J995
- SAE J429
- ISO 898-1
Dimensional standard
- ANSI B 28.2.4 1M
- ANSI B 18.2.4 2M
- ASME B18.5
Support documents list with each delivery
- Third party n inspection report
- Laboratory test certificate from govt approved lab
- Surface roughness measurement
- Heat treatment chart
- Raw material certificates
- HS Code commercial invoice
- Fumigation certificates
- Moisture testing reports
Call Naman pipe for a Free Sample of DIN 1.4462 L anchor bolts and Hex Head Anchor Bolts
Duplex 2205 Wedge Anchors Price List
US $
7.03
Per Piece
Alloy 2205 Size:m42 X 385l Anchor Bolt
US $
6.63
Per Piece
Dss 1250h U Anchor Bolt M24 X 385
US $
9.66
Per Piece
Anchor Bolt M36 X 410l Uns S31803
2205 Duplex Steel Stone Bolt and Toggle Bolts are used to connect structural and non-structural elements to concrete
Duplex Anchor Bolts Types
Duplex Anchor Bolts
UNS S31803 Toggle Bolts
Alloy 2205 L Shaped Anchor Bolts
UNS S32205 Flat Head Sleeve Anchors
SAF 2205 Sleeve Anchor Bolt
2205 DSS Toggle Wing Bolts
Duplex Hammer Drive Anchors
ASTM A479 Gr 2205 Lag Screw Shields
DIN 1.4462 Foundation Bolt
DIN 1.4462 Hammer Drive Anchors Dimension
| Size Diameter |
Working Load Lbs. | Outside Diameter | Ship Weight Per 100 |
| 10 x 7/8 Inch 1/4 x 3/4 Inch 1/4 x1 Inch 1/4 x 1-1/4 Inch 1/4 x 1-1/2 Inch 1/4 x 2 Inch |
60 Lbs 150 Lbs 200 Lbs 250 Lbs 300 Lbs 400 Lbs |
3/16 Inch 1/4 Inch 1/4 Inch 1/4 Inch 1/4 Inch 1/4 Inch |
1.00 1.25 2.00 2.75 3.00 3.06 |
Avesta 2205 Lag Screw Shields Dimension table
| Size | Length Of Shield |
Diameter Of Lag Screw w/Which Shield Is Used | Outside Diameter & Drill Requriments |
Ship Wieght Per 100 |
| 1/4 Short 1/4 Long 5/16 Short 5/16 Long 3/8 Short 3/8 Long 1/2 Short 1/2 Long |
1 1-1/2 1-1/4 1-3/4 1-3/4 2-7/16 2 3 |
1/4 Inch 1/4 Inch 5/16 Inch 5/16 Inch 3/8 Inch 3/8 Inch 1/2 Inch 1/2 Inch |
1/2 1/2 1/2 1/2 5/8 5/8 3/4 3/4 |
3.00 5.00 3.00 5.00 7.00 9.50 10.50 14.00 |
Dimension of 2205 SS Toggle Wings
| Screw Size | Size Of Drill | Length Of Anchor | Ship Wt. Per 1000 |
| 6-8-10 Inch 10-12 Inch 12-14 Inch |
3/16 1/4 5/16 |
15/16 1-1/8 1-7/16 |
1.00 2.08 3.50 |
SAF 2205 Wedge Anchors Dimension
| Size | Hole Size | Ship Wgt /100 | Thread Length | Min. Imbed. | ||||||||||
|
1/4 1/4 1/4 |
3.000 3.620 5.020 |
3/4 1 1 |
1-1/8 1-1/8 1-1/8 |
||||||||||
|
3/8 3/8 3/8 3/8 3/8 |
8.080 9.980 11.00 12.76 16.24 |
1-1/8 1-1/8 1-1/8 1-1/4 1-1/4 |
1-5/8 1-5/8 1-5/8 1-5/8 1-5/8 |
||||||||||
|
1/2 1/2 1/2 1/2 1/2 |
18.82 23.58 26.86 33.63 43.33 |
1-1/2 1-1/2 1-1/2 1-1/2 1-1/2 |
2-1/4 2-1/4 2-1/4 2-1/4 2-1/4 |
||||||||||
|
5/8 5/8 5/8 5/8 |
41.00 44.00 52.00 59.95 |
1-5/8 1-9/16 1-9/16 1-9/16 |
2-3/4 2-3/4 2-3/4 2-3/4 |
||||||||||
|
3/4 3/4 3/4 |
63.35 68.80 76.70 |
2-3/16 2-3/16 2-3/16 |
3-1/4 3-1/4 3-1/4 |
Dimension of A276 Gr 2205 Hollow Wall Anchors
| Size | E | A | C | B | D | G | Screw Lgth. |
ShipWt. Per 100 |
F | Max. Exp. |
| Collar | Screw | Overall | Body | Sleeve | Nut | Expansion | ||||
| 1/8 x 5/l6 XShort 1/8 x 5/16 Short 1/8 x 5/l6 Long 1/4 x 1/2 Short 1/4 x 1/2Long |
1/2 1/2 1/2 11/16 11/16 |
6-32 (1/8) 6-32 (1/8) 6-32 (1/8) 1/4-20 (1/4) 1/4-20 (1/4) |
25/32 1-9/32 1-23/32 1-13/16 2-5/16 |
1/4 1/4 1/4 3/8 3/8 |
1/8 23/64 51/64 3/8 7/8 |
5/32 17/64 17/64 9/32 9/32 |
1 1-7/16 1-59/64 2-1/4 2-1/2 |
1.00 1.25 1.75 5.50 6.75 |
31/64 5/8 5/8 1-3/16 1-3/16 |
43/64 11/16 11/16 1-1/8 1-1/8 |
All Duplex Anchor Bolts Types
UNS S32205 Flat Head Sleeve Anchors Chemical Composition
S Sulfur 0.02(maximum) |
|
P Phosphorous 0.030(maximum) |
Fe Iron 63.54(minimum) |
Mn Manganese 2.00(maximum) |
|
Ni Nickel 4.50(min)-6.50(max) |
Mo Molybdenum 2.50(min)-3.50(max) |
|
Cr Chromium 21.0(min)-23.0(max) |
C Carbon 0.03(maximum) |
UNS S31803 Toggle Bolts Mechanical Properties
Tensile strength 621 Mpa |
 |
Density 7800 kg/m3 |
Yield strength 448 Mpa |
Melting Point 2588°F-2669°F |
|
Elongation 25(% in 50mm) min |
- |
Equivalant Of Alloy 2205 Anchor Bolts
| Grade | Common Name | Related Specifications | ||
|---|---|---|---|---|
| European | UNS | ASTM/ASME | ||
| 2205/31803 | SAF 2205 ® | 1.4462 | S31803/S32205 | F51/F60 |
SAF 2205 Sleeve Anchor Bolt Size Chart
| Diameter in Inch | Hook Lengh | Thread Length | Length |
| 1/2 Inch | 1-1/2 | 1-3/4 | 10 |
| 3/8 Inch | 1 | 1-3/4 | 8 |
| 1/2 Inch | 1-1/2 | 1-3/4 | 6 |
| 1/2 Inch | 1-1/2 | 1-3/4 | 8 |
| 3/8 Inch | 1 | 1-3/4 | 6 |
| 1/2 Inch | 1-1/2 | 1-3/4 | 12 |
| 1/2 Inch | 1-1/2 | 2 | 14 |
| 1/2 Inch | 1-1/2 | 2 | 16 |
| 1/2 Inch | 1-1/2 | 2 | 18 |
| 5/8 Inch | 2 | 2 | 8 |
| 1 Inch | 4 | 4 | 24 |
| 5/8 Inch | 2 | 3-3/4 | 10 |
| 5/8 Inch | 2 | 3-3/4 | 12 |
| 5/8 Inch | 3 | 3-3/4 | 14 |
| 5/8 Inch | 3 | 4 | 18 |
| 3/4 Inch | 3 | 3-3/4 | 12 |
| 3/4 Inch | 3 | 3-3/4 | 15 |
| 3/4 Inch | 3 | 3-3/4 | 16 |
| 3/4 Inch | 3 | 4 | 24 |
| 3/4 Inch | 3 | 4 | 18 |
| 1 Inch | 4 | 4 | 12 |
| 1 Inch | 4 | 4 | 18 |
| 1 Inch | 4 | 6-1/4 | 36 |
An Indian Manufacturer but Global supplier, check what and where
Al Sunaynah Dairy Processing Plant Project- Oman
Shah Alam Plant- Malaysia
Ogidigben Gas Revolution Industrial Park- Africa
Sinais Mahsama Water Desalination Plant- Egypt
Petroliam Nasional Berhad- Malaysia
Abengoa Agua- Saudi Arabia