SA276 UNS S32205 bolts manufacturer in India
Table of Content
View sizes of ASTM A276 S32205 Flat Washer and Hex Nuts
ASTM A276 UNS S32205 Fasteners Standard & Sizes
American standard
- ASTM A276
- ASME SA276
Nut sizes
- Imperial : M10 – M65
Washer size chart
-
3/6″ to 2″
M3 to M56
ASME SA276 S32205 hex bolt head types
- Hex washer head
- Combination Drive
- Hex / Socket / Allen Drive
- Frearson Drive
- Slotted Drive
- Phillips Drive
- Hex head
- Slotted hex washer
- Flat
- Button head
- Truss
Thread class
- 5 HF
- 5 CSF
- Class 3A (Tight fit)
- 3G
- custom
- Class 1A (Loose fit)
- Class 2A (Medium fit)
- 4G
- 6G
- 5 ONF
- 8G
- 2G
SA276 S32205 hex bolt sizes
- Imperial UNS S32205 bolt:
3/6″ to 2″ - Metric A276 S32205 bolt:
M3 to M56
Custom Size/ Cut to length
- Mail us at info@namanpipe.com
SA276 S32205 Screws and Round Head Bolts can withstand temperature upto 704 °C
SA276 UNS S32205 Fasteners Specification Chart
UNS S32205 socket head cap screws manufacturing method
- Cold forging
- Heat and surface treatment
- Machining
- Thread forming
- Hot forging
Origin of material
- USA
- Korean
- Ukraine
- Japanese
- Russian
- European
- Indian
SA276 UNS S32205 anchor bolts required testing & certificates
- EN 10204 / 3.1, 3.2
- Microstructure Analysis
- Charpy V-notch test
- Tensile test
- Rockwell / Brinell Hardness test
- Impact testing
Inventory delivery time
Delivery time (If not in Stock)
Need urgent delivery
ASME SA276 S32205 socket head bolts surface treatments
- Solution Annealed
- Aging
- Annealed
MTC
- EN 10204 3.1 Manufacturer Test Certificate / PED 97/23/EC Certified
Manufacturing process
- Cold finished
- Hot finished
Annealing of ASTM A276 S32205 Nut
- 1900°/1922°F
- 1040°/1080°C
ASME SA276 UNS S32205 anchor bolts temperature rating
- 300°C
Material equivalents
- SAF 2205
- EN 1.4462
Uses & applications
- Wind mills
- Solar plants
- Offshore
- Aerospace
- Flange joints
- Ship building
- Rigs
- Bridge construction
- Petrochemical plants
- Automotive industry
Value added services offer by naman pipe & tubes
- Cross drilling
- Factory direct Shipments
- Expedited Services
- Milling
- Cut Off & Chamfer
- Tapping & drilling
- Cut threading
- Packaging: Box, Bags and labeling
- Grooving
A276 S32205 socket head bolts end
- Semi-cone point
- 45 degree angle cut
- Sheared end
- Chamfer end
- Gimlet point
- Milled end
- Chisel point
- Half point
- Cone point
A276 UNS S32205 thread types
- Coarse thread (UNC)
- 8-Thread Series(8UN)
- BSF
- Metric fine
- ACME
- 12-thread series (12-UN)
- Metric coarse
- UNEF
- Fine Thread (UNF)
- UNJ
- Trapezoidal
A276 UNS S32205 hex nut welding methods
- Resistance welding
- High-frequence welding
- Laser welding
- Flux-cored arc welding (FCW)
- Shielded metal arc welding (SMAW)
- Gas tungsten arc welding TIG (GTAW)
- Gas metal arc welding MIG (GMAW)
- Submerged arc welding (SAW)
- Plasma arc welding (PAW)
Types of ASME SA276 S32205 fastener
- Grub screws
- Flat washer
- Wood screws
- Spring washer
- Hexagonal washer
- Flange lock nut
- Castle nut
- Hex head bolt
- Hex lag screws
- Fully threaded screws
- Round head bolts
- Lug nuts
Dimensional standard of SA276 S32205 Screws
Testing methods
- Tensile test
- Proof Load Test
- Decarburization test
- Hardness testing
- Carburization test
- Retempering test
- Head soundness test
- Fatigue tests on screws
- Charpy impact tests
- Fatigue test on H specimens
- Torsion test
Testing standards of UNS S32205 machine bolts
- ISO 898-1
- SAE J429
- SAE J1199
- SAE J995
- ASTM F606/F606M
Dimensional Standard
- ASME B18.5
- ANSI B 28.2.4 1M
- ANSI B 18.2.4 2M
DIN / ISO standard
- DIN 912
- DIN 603
- DIN 933
- DIN 6923
- DIN 970
- DIN 931
- DIN 7981
- DIN 934
- DIN916
- DIN 7985
- DIN 798
- DIN 913
- ISO 4033
- ISO 4032
- JIS standards
- ISO 4017
- ISO 7380
Support documents list with each delivery
- Moisture testing reports
- Laboratory test certificate from govt approved lab
- Fumigation certificates
- Heat treatment chart
- Raw material certificates
- Third party n inspection report
- Surface roughness measurement
- HS Code commercial invoice
ASME SA276 S32205 Threaded Stud Bolt Chemical Composition
Cr Chromiun 22.0-23.0 |
|
C Carbon 0.030 |
N Nitrogen min: 0.14 max: 0.20 |
Mn Manganese 2.00 |
|
- |
P Phosphorus 0.030 |
|
S Sulfur 0.020 |
Ni Nickel 3.0-3.5 |
|
Si Silicon 0.020 |
Mo Molybdenum 0.08-0.20 |
A276 S32205 Heavy Hex Nuts Mechanical Properties
Tensile strength 95 ksi 655 Mpa |
 |
Yield strength 65ksi 450 Mpa |
Elongation 25 % |
Reduction - |
Refer physical properties of ASME SA276 S32205 Threaded Stud Bolt and Industrial Fasteners
Physical Properties of A276 S32205 Fasteners
| Density, lb/in3 | 0.285 |
| Coefficient of Thermal Expansion, 68-212˚F, /˚F | 7.6 x 10-6 |
| Modulus of Elasticity, psi | 27.5 x 106 |
| Thermal Conductivity, Btu/ft hr ˚F | 11 |
| Electrical Resistivity, Microhm-in | 31.5 |
| Specific Heat, Btu/lb ˚F | 0.10 |
ASME SA276 S32205 Threaded Stud Bolt Corrosion Resistance
| Alloy | 2205 |
| CRITICAL PITTING TEMPERATURE, CPT | 130°F |
A276 UNS S32205 heavy hex bolts Application
- Pulp and paper industry
- Marine industry
- Automotive structures
- Drinking water systems
- Desalination systems
- Food processing industry
- Medical industry
A276 S32205 Spring Washer and Heavy Hex Nuts widely used in Oil and Gas Industry, View heat resistance
Heat Resistance and Heat Treatment of SA276 S32205 Screws
| Heat Resistance | above 300°C |
| Heat Treatment | 1020 - 1100°C |
ASTM A276 S32205 Nut Dimensions Chart
| F | T | E | Thread Pitch |
|||
| Width Across Flats |
Height of the Nut |
Width Across Corners |
||||
| Nut Size | max. | min. | max. | min. | min. | |
| M1.6 | 3.20 | 3.02 | 1.30 | 1.05 | 3.41 | 0.35 |
| M2 | 4.00 | 3.82 | 1.60 | 1.35 | 4.32 | 0.4 |
| M2.5 | 5.00 | 4.82 | 2.00 | 1.75 | 5.45 | 0.45 |
| M3 | 5.50 | 5.32 | 2.40 | 2.15 | 6.01 | 0.5 |
| M3.5* | 6.00 | 5.82 | 2.80 | 2.55 | 6.58 | 0.6 |
| M4 | 7.00 | 6.78 | 3.2 | 2.9 | 7.66 | 0.7 |
| M5 | 8.00 | 7.78 | 4.7 | 4.4 | 8.79 | 0.8 |
| M6 | 10.00 | 9.78 | 5.2 | 4.9 | 11.05 | 1 |
| M8 | 13.00 | 12.73 | 6.80 | 6.44 | 14.38 | 1.25 |
| M10 | 16.00 | 15.73 | 8.40 | 8.04 | 17.77 | 1.5 |
| M12 | 18.00 | 17.73 | 10.80 | 10.37 | 20.03 | 1.75 |
| M14* | 21.00 | 20.67 | 12.8 | 12.1 | 23.36 | 2 |
| M16 | 24.00 | 23.67 | 14.8 | 14.1 | 26.75 | 2 |
| M18* | 27.00 | 26.16 | 15.8 | 15.1 | 29.56 | 2.5 |
| M20 | 30.00 | 29.16 | 18.0 | 16.9 | 32.95 | 2.5 |
| M22* | 34 | 33 | 19.4 | 18.1 | 37.29 | 2.5 |
| M24 | 36 | 35 | 21.5 | 20.2 | 39.55 | 3 |
| M27* | 41 | 40 | 23.8 | 22.5 | 45.2 | 3 |
| M30 | 46 | 45 | 25.6 | 24.3 | 50.85 | 3.5 |
| M33* | 50 | 49 | 28.7 | 27.4 | 55.37 | 3.5 |
| M36 | 55.0 | 53.8 | 31.0 | 29.4 | 60.79 | 4 |
| M39* | 60.0 | 58.8 | 33.4 | 31.8 | 66.44 | 4 |
| M42 | 65.0 | 63.1 | 34.0 | 32.4 | 71.3 | 4.5 |
| M45* | 70.0 | 68.1 | 36.0 | 34.4 | 76.95 | 4.5 |
| M48 | 75.0 | 73.1 | 38.0 | 36.4 | 82.6 | 5 |
| M52* | 80.0 | 78.1 | 42.0 | 40.4 | 88.25 | 5 |
| M56 | 85.0 | 82.8 | 45.0 | 43.4 | 93.56 | 5.5 |
| M60* | 90.0 | 87.8 | 48.0 | 46.4 | 99.21 | 5.5 |
| M64 | 95.0 | 92.8 | 51.0 | 49.1 | 104.86 | 6 |