1.4462 stainless steel material suppliers, flange 1.4462, en 1.4462 pipe, 1.4462 plate, 1.4462 round bar, 1.4462 tube

1.4462 stainless steel material suppliers - Largest Suppliers & Distributor Of flange 1.4462, en 1.4462 pipe, 1.4462 plate, 1.4462 round bar, 1.4462 tube 140 Ton Ready Stock for Sale.

Naman Pipe & Tubes has flange 1.4462 inventory to fulfill your project’s needs, buy en 1.4462 pipe at best price & fast delivery. Supplying 1.4462 plate, 1.4462 round bar, 1.4462 tube from approved manufactures and stockists based in the INDIA


Our specialty at Naman Pipe & Tubes offers a full range of flange 1.4462, en 1.4462 pipe, 1.4462 plate, 1.4462 round bar, 1.4462 tube form. We have ready stock available of flange 1.4462, en 1.4462 pipe, 1.4462 plate, 1.4462 bar, 1.4462 tube And Round Bar in all forms which makes an ideal one stop shop for all your requirements.
Our reputation is to supply our customers with QUALITY MATERAL, IMMEDIATE DELIVERIES and LOW PRICES. Our first priority is “Servicing out Customers.” Twenty-four Hours a Day. We also supply products with minimum orders, in small quantity of all sizes.

1.4462 Duplex stainless steels are extremely corrosion resistant, work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result, duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels. This combination of properties can mean some compromise when compared with pure austenitic and pure ferritic grades. Duplex stainless steels are in most cases, tougher than ferritic stainless steels. Strengths of duplex stainless steels can in some cases be double that for austenitic stainless steels.

Whilst duplex stainless steels are considered resistant to stress corrosion cracking, they are not as resistant to this form of attack as ferritic stainless steels. However, the corrosion resistance of the least resistant duplex stainless steels is greater than that for the most commonly used grades of stainless steels, i.e. 304 and 316.

1.4462 Duplex steels are also magnetic, a property that can be used to easily differentiate them from common austenitic grades of stainless. Property data given in this document is typical for flat rolled products covered by EN 10088-2:2005. ASTM, EN or other standards may cover products sold. It is reasonable to expect specifications in these standards to be similar but not necessarily identical to those given in this datasheet.

Alloy Designations

Grade 1.4462/2205 is similar to but may not be a direct equivalent:

  • UNS S31803
  • UNS S32205
  • BS 318S13

Grade 1.4462 Supplied Forms

  • 1.4462 Fittings
  • 1.4462 Flanges
  • 1.4462 Pipe
  • 1.4462 Plate
  • 1.4462 Sheet
  • 1.4462 Tube
  • 1.4462 Round Bar
  • 1.4462 Bolts

Stainless Steel 1.4462 Chemical Composition

Spec: EN 10088-2:2005

1.4462 Steel

Chemical Element % Present
Carbon (C) 0.0 - 0.03
Chromium (Cr) 21.00 - 23.00
Manganese (Mn) 0.0 - 2.00
Silicon (Si) 0.0 - 1.00
Phosphorous (P) 0.0 - 0.03
Sulphur (S) 0.0 - 0.02
Nickel (Ni) 4.50 - 6.50
Nitrogen (N) 0.10 - 0.22
Molybdenum (Mo) 2.50 - 3.50
Iron (Fe) Balance

Stainless Steel 1.4462 Properties

Physical Property Value
Density 7.805 g/cm³
Thermal Expansion 13.7 x10^-6 /K
Modulus of Elasticity 200 GPa
Thermal Conductivity 19.0 W/m.K
Electrical Resistivity 0.085 x10^-6 Ω .m

Spec: EN 10088-2:2005

Sheet - Up to 8mm thick

Mechanical Property Value
Proof Stress 500 Min MPa
Tensile Strength 700 to 950 MPa
Elongation A50 mm 20 Min %

Spec: EN 10088-2:2005

Plate - over 8mm to 13.5mm Thick

Mechanical Property Value
Proof Stress 460 Min MPa
Tensile Strength 700 to 950 MPa
Elongation A50 mm 25 Min %

Spec: EN 10088-2:2005

Plate - Over 13.5mm to 75mm Thick

Mechanical Property Value
Proof Stress 460 Min MPa
Tensile Strength 640 to 840 MPa
Elongation A50 mm 25 Min %

Grade 1.4462 Applications

1.4462 Duplex stainless steels are typically used in:

  • ~ Chemical processing, transport and storage
  • ~ Oil and gas exploration and offshore rigs
  • ~ Oil and gas refining
  • ~ Marine environments
  • ~ Pollution control equipment
  • ~ Pulp & paper manufacturing
  • ~ Chemical process plant

Grade 1.4462 Corrosion Resistance

1.4462 Duplex stainless steels are extremely corrosion resistant. They have high resistance to intergranular corrosion. Even in chloride and sulphide environments, duplex stainless steels exhibit very high resistance to stress corrosion cracking.

The super duplex grades are even more resistant to corrosion.


Grade 1.4462 Heat Resistance

The high chromium content of duplex stainless steels that protects against corrosion, causes embrittlement at temperatures over about 300°C.

At low temperatures duplex stainless steels have better ductility than the ferritic and martensitic grades. Duplex grades can readily be used down to at least -50°C.


Grade 1.4462 Fabrication

Fabrication of all stainless steels should be done only with tools dedicated to stainless steel materials. Tooling and work surfaces must be thoroughly cleaned before use. These precautions are necessary to avoid cross contamination of stainless steel by easily corroded metals that may discolour the surface of the fabricated product.


Grade 1.4462 Machinability

Although machinable, the high strengths of duplex stainless steels makes machining difficult. As an example, machining of 2205 is around 20% slower than for 304.

  • Machining can be enhanced by using the following rules:
  • ~ Cutting edges must be kept sharp. Dull edges cause excess work hardening.
  • ~ Cuts should be light but deep enough to prevent work hardening by riding on the surface of the material.
  • ~ Chip breakers should be employed to assist in ensuring swarf remains clear of the work
  • ~ Low thermal conductivity of austenitic alloys results in heat concentrating at the cutting edges. This means coolants and lubricants are necessary and must be used in large quantities.

Grade 1.4462 Heat Treatment

1.4462 Duplex stainless steels cannot be hardened by heat treatment. They can however be work hardened.

Solution treatment or annealing can be done by rapid cooling after heating to around 1100°C.


Grade 1.4462 Weldability

1.4462 Duplex stainless steels have good weldability. All standard welding processes can be used. They are not quite as easily welded as the austenitic grades but low thermal expansion in duplex grades reduces distortion and residual stresses after welding. The recommended filler material for 2205 stainless steel is 2209.

-----------> Stainless Steel 1.4462 Products

Please feel free Send your inquiry in the form below. we will reply you soon

 

People Also Search :

1.4462 difference between 1.4462 and 1.4460 1.4462 datenblatt grade 1.4462 stainless steel
1.4462 material equivalent 1.4462 spanende bearbeitung 1.4462 dichte 1.4462 material group
1.4462 equivalent aisi 1.4462 chemical composition 1.4462 composition 1.4462 steel grade
1.4462 stainless 1.4462 corrosion resistance 1.4462 en 10028-7 1.4462 material grade
1.4462 aisi 1.4462 chemische zusammensetzung 1.4462 en 10088 stainless grade 1.4462
1.4462 bar 1.4462 material composition 1.4462 en standard en 10088 grade 1.4462
1.4462 pren duplex 1.4462 chemical composition 1.4462 edelstahl 1.4462 spezifisches gewicht
1.4462 vs 316l 1.4462 duplex stainless steel equivalent 1.4462 e-modul 1.4462 duplex outokumpu
1.4462 equivalent astm 1.4462 duplex stainless steel properties 1.4462 en 10088-3 1.4462 mechanical properties
1.4462 astm equivalent 1.4462 duplex chemical composition 1.4462 en 10272 1.4462 yield strength
1.4462 alloy 1.4462 duplex stainless steel composition en 1.4462 1.4462 material data sheet
1.4462 (aisi 318ln) 1.4462 steel properties en 1.4462 equivalent 1.4462 material specification
1.4462 alloy 2205 1.4462 stainless steel composition en 1.4462 standard 1.4462 machinability
1.4462 austenitic 1.4462 stainless steel properties en 1.4462 yield 1.4462 material standard
1.4462 acerinox 1.4462 stainless steel bar en 1.4462 pdf acero inoxidable 1.4462
1.4462 astm nuance 1.4462 en 1.4462 pipe rohre in 1.4462
1.4462 asme nerez 1.4462 en 1.4462 yield strength acciaio inox 1.4462
1.4462 ankerkette 1.4462 offshore 1.4462 ss 2377 equivalence inox 1.4462
1.4462 bolt 1.4462 outokumpu en 1.4462 steelnumber 1.4462 jis
1.4462 blech density of 1.4462 en 1.4462 outokumpu 1.4462 equivalent jis
1.4462 böhler 1.4462 obróbka 1.4462 f51 jakost 1.4462
1.4462 beständigkeit 1.4462 online shop 1.4462 forging korrosion 1.4462
1.4462 buis 1.4462 online 1.4462/f51 + crabide thyssen krupp 1.4462
1.4462 bezeichnung 1.4462 ocel 1.4462 fda 1.4462 round bar
burgmann 1.4462 1.4462 oder 1.4571 1.4462/f51/f60 1.4462 rohr
1.4462 casting 1.4462 obrobitelnost 1.4462 festigkeit 1.4462 round
1.4462 class 80 1.4462 pipe 1.4462 fatigue 1.4462 rör
1.4462 cena 1.4462 plate flange 1.4462 1.4462 rm
1.4462 chloride 1.4462 pdf 1.4462 flachstahl 1.4462 rvs
1.4462 duplex 1.4462 price 1.4462 federdraht duplex rvs 1.4462
1.4462 data sheet 1.4462 passivation 1.4462 grade stahl rohr 1.4462
1.4462 duplex pipe 1.4462 properties 1.4462 guss 1.4462 rostfrei
1.4462 hb 1.4462 paslanmaz 1.4462 geschliffen 1.4462 stainless steel
1.4462 hastelloy 1.4462 paslanmaz çelik 1.4462 hardness 1.4462 vs 1.4404
1.4462 hardening 1.4462 poisson ratio 1.4462 heat treatment 1.4462 vs 1.4460
aisi 316l 1.4462 1.4462 (saf 2205) duplex 1.4462 hardness 1.4462 vs 1.4401
1.4462 material 1.4462 standard 1.4462 material hardness 1.4462 vs 316
1.4462 material spec 1.4462 stahl 1.4462 steel hardness 1.4462 vs 2205
1.4462 material name ss 1.4462 1.4462 inox 1.4462 vs 1.4468
en number 1.4462 duplex ss 1.4462 1.4462 in aisi 1.4462 vs 1.4470
material number 1.4462 material ss 1.4462 1.4462 in astm 1.4462 vdtüv 418
material no 1.4462 1.4462 ss316 iso 1.4462 1.4462 vs 1.4571
material nr 1.4462 1.4462 temperature inox 1.4462 duplex v-flansche 1.4462
1.4462 nace 1.4462 teräs acier inox 1.4462 1.4462 welding
1.4462 steel number 1.4462 tube 1.4462 weldability 1.4462 wiki
1.4462+1d 1.4462 tensile strength wnr 1.4462 1.4462 werkstoff
1.4462+1x 1.4462 thyssenkrupp welding 1.4462 stainless steel 1.4462 werkstoffgruppe
1.4462 vs 1.4517 1.4462 thyssen wn.1.4462 material 1.4462 werkstoffdatenblatt
1.4462 2e 1.4462-tc1 1.4462 x2crnimo 22.5.3 1.4462 werkstoffnummer
1.4462 duplex 2205 1.4462 thermal conductivity 1.4462 (x2crnimon22-5-3) 1.4462 zerspanung
1.4462 saf 2205 1.4462 uranus 1.4462 yield 1.4462 zuschnitte
1.4462 (x2crnimon22-5-3 1.4462 uns duplex 1.4462 yield werkstoff 1.4462 zugfestigkeit
1.4462 2b 1.4462 uns s31803 duplex 1.4462 yield strength werkstoff 1.4462 zerspanbarkeit
1.4462 rp0 2 1.4462 uranus 45n 1.4462 zugfestigkeit edelstahl 1.4462 zusammensetzung
316l 1.4462 1.4462 ugitech 1.4462 zusammensetzung 1.4462 thermal expansion
1.4462 pre 35 1.4462 usa 1.4462 zastosowanie w.nr. 1.4462, une 1.4462
1.4462 en 10222-5 1.4462 und 1.4571 stal 1.4462 zastosowanie usinage 1.4462 , ws 1.4462
1.4462 en 10216-5 1.4462 umformen composicion quimica 1.4462  

 




If You’re Looking For A Trusted And Reliable Supplier Of Super Duplex Steel Bars
Then Call
Naman Pipe & Tubes Today

PHONE:+91 22 67438107, +91(22) - 67438116, +91 9004 096 535

EMAIL ID:info@namanpipe.com,namanpipes@gmail.com

© 2015 NAMAN PIPE & TUBES , All rights reserved. | Designed & SEO By MESOTEK

collapse